Home › Refrigerator Water Filters › Whirlpool › KTRA22EMWH01
Water Filter for the KitchenAid KTRA22EMWH01 (EDR6D1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KTRA22EMWH01 specifics — where the filter actually lives
The KTRA22EMWH01 carries its water filter upper back of the fresh-food compartment in most top-freezer layouts that carry a dispenser — usually a kneeling-height or shoulder-height swap, not a teardown. Mechanically it is a quarter-turn twist-in seat: release is counterclockwise, seating is clockwise, and the stops are firm enough that you cannot overshoot.
The recurring owner notes: expect the first swap to take longer than the box suggests — aged o-rings grip — so budget ten minutes, not five. KTR reads as a chassis statement rather than a trim code: it usually marks a top-freezer layout, which means shared cartridge economics — one media family, dozens of cabinet variants, all drinking from the same parts line. The -01 tail tracks the revision ladder — each rung shares the identical EDR6D1 bay.
KTR vs KSR — what the prefix tells you
The KTR/KSR pair divides this family by layout — Chassis first: top-freezer (KTR) versus side-by-side chassis (KSR). The shared cartridge line covers both without adaptation. Working from the model code, the KTRA22EMWH01 lands somewhere around 2003-2007; treat the window as approximate.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KTRA22EMWH01 filter questions
Filter light reset on the KitchenAid KTRA22EMWH01 — how?
Lock in the new cartridge first, then hold the reset control for a few seconds — the KTRA22EMWH01 manual documents the button for each panel variant.
Can I run the KitchenAid KTRA22EMWH01 with no cartridge installed?
No — run it empty if you like; the EDR6D1 bay needs no bypass plug, it simply passes water through untreated.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR6D1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KTRA22EMWH01?
Every six months or at the rated gallon capacity, whichever comes first — the EDR6D1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR6D1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →