Home › Refrigerator Water Filters › Whirlpool › KSSC48FKS00

KSSC48FKS00
Exact-Fit Model Guide

Water Filter for the KitchenAid KSSC48FKS00 (EDR5RXD1)

Your Whirlpool refrigerator takes the EDR5RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KSSC48FKS00 replacement water filter cartridge
Replacement cartridge for this model
KSSC48FKS00 · Quick Facts
TYPE
refrigerator
YEARS MADE
2001-2005
FILTER LOCATION
low on the fresh-food side or behind the base grille in most side-by-side layouts
FILTER SLOT
EveryDrop Filter 5 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
—
KSSC48FKS00 · Quick Facts
Filter locationlow on the fresh-food side or behind the base grille in most side-by-side layouts
Filter slotEveryDrop Filter 5 bay
Replace everyEvery 6 months
Years made2001-2005
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for KSSC48FKS00. Cross-checked against Whirlpool service documentation — this model family uses the EDR5RXD1 bay with no chip or bypass restrictions.

KSSC48FKS00 specifics — where the filter actually lives

The filter bay on the KSSC48FKS00 low on the fresh-food side or behind the base grille in most side-by-side layouts, a deliberate placement that keeps the swap away from the door seals and drawer rails. It is a twist-lock bay: a quarter turn one way to release, the other to seat, and the only tool you need is a towel for the drip.

The recurring owner notes: carbon fines in the first pours are normal for a fresh bed, and the filter timer only restarts when you hold the reset. KSS reads as a chassis statement rather than a trim code: KSS on this badge family usually means side-by-side stock, which is why fit charts list cartridges by chassis code first. The -00 tail tracks the revision ladder — each rung shares the identical EDR5RXD1 bay.

KSS vs the rest of the catalog — what the prefix tells you

The catalog pairs KSS with the rest of the catalog, and the split matters at order time: KSS answers to side-by-side; the rest of the catalog answers to the neighboring layout; the water-filter answer is shared. Working from the model code, the KSSC48FKS00 lands somewhere around 2001 to 2005; treat the window as approximate.

Swap it in 5 minutes

Installing the replacement water filter in the KSSC48FKS00
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KSSC48FKS00 filter questions

KitchenAid KSSC48FKS00: how do I clear the change-filter light?

Lock in the new cartridge first, then hold the reset control for a few seconds — the KSSC48FKS00 manual documents the button for each panel variant.

Is a bypass plug required for the KSSC48FKS00 when the cartridge is removed?

The bay self-seals: with no cartridge the KSSC48FKS00 still dispenses, just unfiltered. No bypass plug exists for this line.

Are off-brand filters safe for a KitchenAid refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR5RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KSSC48FKS00?

Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR5RXD1 cartridge

This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →