HomeRefrigerator Water FiltersWhirlpoolKSRS25FGBL02

KSRS25FGBL02
Exact-Fit Model Guide

Water Filter for the Kenmore KSRS25FGBL02 (EDR5RXD1)

Your Whirlpool refrigerator takes the EDR5RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KSRS25FGBL02 replacement water filter cartridge
Replacement cartridge for this model
KSRS25FGBL02 · Quick Facts
TYPE
refrigerator
YEARS MADE
2017-2021
FILTER LOCATION
in the lower fresh-food zone in most side-by-side layouts, knee height or below
FILTER SLOT
EveryDrop Filter 5 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
ksrs25fgbl00
KSRS25FGBL02 · Quick Facts
Filter locationin the lower fresh-food zone in most side-by-side layouts, knee height or below
Filter slotEveryDrop Filter 5 bay
Replace everyEvery 6 months
Years made2017-2021
Also branded asksrs25fgbl00
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for KSRS25FGBL02. Cross-checked against Whirlpool service documentation — this model family uses the EDR5RXD1 bay with no chip or bypass restrictions.

KSRS25FGBL02 specifics — where the filter actually lives

The KSRS25FGBL02 carries its water filter in the lower fresh-food zone in most side-by-side layouts, knee height or below, a spot that survives trim changes across the KSR run. The seat is a twist-in design — the cartridge drops into the keyed seat and locks with a short quarter turn.

The small print owners learn the hard way: expect the first swap to take longer than the box suggests — aged o-rings grip — so budget ten minutes, not five. Decode the plate and the parts question answers itself: in this catalog KSR is the side-by-side chassis marker; internal layouts vary, the bay layout does not. The two-digit 02 tail is revision bookkeeping. Badge position and shelf trim moved around; the bay geometry did not.

KSR vs KTR — what the prefix tells you

KSR versus KTR is the first fork in the parts catalog: side-by-side chassis builds carry KSR; top-freezer builds carry KTR. Filter-wise the two lines converge on one cartridge family. The KSRS25FGBL02 decodes to about 2017-2021 by catalog convention — close enough to bracket the cartridge generation, not close enough to certify.

Swap it in 5 minutes

Installing the replacement water filter in the KSRS25FGBL02
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KSRS25FGBL02 filter questions

Kenmore KSRS25FGBL02: how do I clear the change-filter light?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the KSRS25FGBL02 owner’s manual lists the button location for your control panel.

KSRS25FGBL02 with no water filter installed — safe, or does it need a bypass?

No — run it empty if you like; the EDR5RXD1 bay needs no bypass plug, it simply passes water through untreated.

Are off-brand filters safe for a Kenmore refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR5RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KSRS25FGBL02?

Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR5RXD1 cartridge

This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →