Home › Refrigerator Water Filters › Whirlpool › KSRB25FKBL00
Water Filter for the KitchenAid KSRB25FKBL00 (EDR5RXD1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KSRB25FKBL00 specifics — where the filter actually lives
The filter bay on the KSRB25FKBL00 bottom of the fresh-food column or at the grille line in most side-by-side builds, so expect to clear one shelf edge before you have working room. The seat is a twist-in design — no tools, no housing removal, and the cartridge indexes in only one orientation despite looking symmetric.
Field notes: keep a folded towel under the bay before you open it; the line holds a cup of water even with the valve shut. The KSR prefix is the tell: in this catalog KSR is the side-by-side chassis marker; internal layouts vary, the bay layout does not. Suffix 00 = production revision; filtration hardware was not part of the revision cycle.
KSR vs KTR — what the prefix tells you
KSR or KTR: the badge difference that does (and does not) change the filter order. KSR machines are side-by-side chassis; KTR machines are top-freezer. Both draw from the same cartridge line, which is why fit charts list them together. The KSRB25FKBL00 code suggests roughly 2001 to 2005 production — approximately right, which is all a parts search needs.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KSRB25FKBL00 filter questions
KitchenAid KSRB25FKBL00: how do I clear the change-filter light?
Hold the filter-reset control a few seconds after seating the new cartridge; placements vary by control panel, and the KSRB25FKBL00 manual’s filter-status page has the exact spot.
Does the KitchenAid KSRB25FKBL00 need a bypass plug when the filter is out?
No — run it empty if you like; the EDR5RXD1 bay needs no bypass plug, it simply passes water through untreated.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR5RXD1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KSRB25FKBL00?
Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →