Home › Refrigerator Water Filters › Whirlpool › KSRB22FHBT04

KSRB22FHBT04
Exact-Fit Model Guide

Water Filter for the KitchenAid KSRB22FHBT04 (EDR5RXD1)

Your Whirlpool refrigerator takes the EDR5RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KSRB22FHBT04 replacement water filter cartridge
Replacement cartridge for this model
KSRB22FHBT04 · Quick Facts
TYPE
refrigerator
YEARS MADE
2018-2022
FILTER LOCATION
bottom of the fresh-food column or at the grille line in most side-by-side builds
FILTER SLOT
EveryDrop Filter 5 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
ksrb22fhbt01
KSRB22FHBT04 · Quick Facts
Filter locationbottom of the fresh-food column or at the grille line in most side-by-side builds
Filter slotEveryDrop Filter 5 bay
Replace everyEvery 6 months
Years made2018-2022
Also branded asksrb22fhbt01
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for KSRB22FHBT04. Cross-checked against Whirlpool service documentation — this model family uses the EDR5RXD1 bay with no chip or bypass restrictions.

KSRB22FHBT04 specifics — where the filter actually lives

The KSRB22FHBT04 carries its water filter bottom of the fresh-food column or at the grille line in most side-by-side builds — usually a kneeling-height or shoulder-height swap, not a teardown. The seat is a twist-in design — the bay wants the cartridge offered flat, rotated a quarter turn, and nothing more — hand pressure only.

Before you click buy, two things: carbon fines in the first pours are normal for a fresh bed, and the filter timer only restarts when you hold the reset. One prefix, one chassis family: count on KSR to place this unit among side-by-side chassis builds; that placement carries the water-path geometry with it. Suffix 04 = production revision; filtration hardware was not part of the revision cycle.

KSR vs KTR — what the prefix tells you

KSR or KTR: the badge difference that does (and does not) change the filter order. Ordering by prefix works because KSR means side-by-side chassis and KTR means top-freezer in this catalog — and the cartridge pool overlaps both. By model-code convention the KSRB22FHBT04 falls around 2018 to 2022; treat the dates as a working estimate, not record.

Swap it in 5 minutes

Installing the replacement water filter in the KSRB22FHBT04
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KSRB22FHBT04 filter questions

Filter light reset on the KitchenAid KSRB22FHBT04 — how?

With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the KSRB22FHBT04 manual’s filter section has the exact control for your trim.

Will the KitchenAid KSRB22FHBT04 dispense water without a filter cartridge?

Nothing to buy — the EDR5RXD1 housing closes without a cartridge; water runs unfiltered until the next one goes in.

Are off-brand filters safe for a KitchenAid refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR5RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KSRB22FHBT04?

Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR5RXD1 cartridge

This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →