Home › Refrigerator Water Filters › Whirlpool › KRMF606ESS01
Water Filter for the KitchenAid KRMF606ESS01 (EDR2RXD2)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KRMF606ESS01 specifics — where the filter actually lives
On the KRMF606ESS01, the cartridge in the fresh-food compartment — exact spot varies by dispenser layout, a spot that survives trim changes across the refrigerator run. It is a twist-lock bay: align the ears, seat it, and rotate until the stop catches — a five-minute job start to finish.
The small print owners learn the hard way: the change light ignores the new cartridge until you reset it, and the first removal always takes more muscle than the manual implies. The constant across every trim of this machine is the cartridge line — the EDR2RXD2 media line; that is the anchor every compatible listing hangs from. The 01 suffix here is a revision index, not a different machine — trim and door hardware can shift between revisions, the filter bay does not.
Reading the KRMF606ESS01 model code — what the digits tell you
Catalog convention puts the KRMF606ESS01 near 2015-2019 — an approximation, useful for bracketing the cartridge era only. What stays constant across the trim range: model-code suffixes track cosmetics; the EDR2RXD2 fit is invariant across them.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KRMF606ESS01 filter questions
Filter light reset on the KitchenAid KRMF606ESS01 — how?
Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the KRMF606ESS01 owner’s manual page for filter status.
KitchenAid KRMF606ESS01: bypass plug needed without a filter?
No cap needed — the EDR2RXD2 bay passes water unfiltered while empty; it does not leak, it just skips filtration.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR2RXD2 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KRMF606ESS01?
Every six months or at the rated gallon capacity, whichever comes first — the EDR2RXD2 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR2RXD2. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →