Home › Refrigerator Water Filters › Whirlpool › KFIS29BBMS03

KFIS29BBMS03
Exact-Fit Model Guide

Water Filter for the KitchenAid KFIS29BBMS03 (EDR2RXD2)

Your Whirlpool refrigerator takes the EDR2RXD2 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KFIS29BBMS03 replacement water filter cartridge
Replacement cartridge for this model
KFIS29BBMS03 · Quick Facts
TYPE
refrigerator
YEARS MADE
2013-2017
FILTER LOCATION
inside the fresh-food cavity, upper zone in most French-door builds
FILTER SLOT
EveryDrop Filter 2 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
kfis29bbms, kfis29bbms00, kfis29bbms01, kfis29bbms02
KFIS29BBMS03 · Quick Facts
Filter locationinside the fresh-food cavity, upper zone in most French-door builds
Filter slotEveryDrop Filter 2 bay
Replace everyEvery 6 months
Years made2013-2017
Also branded askfis29bbms, kfis29bbms00, kfis29bbms01, kfis29bbms02
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

ClearFit CF-2008 EDR2RXD1 replacement filter 1-pack product photo
CF-2008

EDR2RXD1 Replacement Water Filter · 1-Pack – ClearFit

$17.99

✓

Verified fit for KFIS29BBMS03. Cross-checked against Whirlpool service documentation — this model family uses the EDR2RXD2 bay with no chip or bypass restrictions.

KFIS29BBMS03 specifics — where the filter actually lives

Where the filter actually lives: inside the fresh-food cavity, upper zone in most French-door builds, so expect to clear one shelf edge before you have working room. This is a twist-style bay, the friendlier design: one twist to release, one to lock; between them you are holding the entire service procedure.

Field notes: keep a folded towel under the bay before you open it; the line holds a cup of water even with the valve shut. Decode the plate and the parts question answers itself: generally a French-door machine, and the filter bay inherits the geometry that implies — treat as typical, not absolute. The -03 tail tracks the revision ladder — each rung shares the identical EDR2RXD2 bay.

KFI vs KBF — what the prefix tells you

Know your KFI from your KBF and the cartridge question halves: KFI answers to French-door; KBF answers to bottom-freezer; the water-filter answer is shared. The KFIS29BBMS03 code suggests roughly 2013-2017 production — approximately right, which is all a parts search needs.

Swap it in 5 minutes

Installing the replacement water filter in the KFIS29BBMS03
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KFIS29BBMS03 filter questions

KFIS29BBMS03 filter light will not turn off — what is the reset step?

Hold the filter-reset control a few seconds after the swap; the status light clears only with a seated cartridge, and the KFIS29BBMS03 manual maps the control by panel type.

Does the KitchenAid KFIS29BBMS03 need a bypass plug when the filter is out?

The bay self-seals: with no cartridge the KFIS29BBMS03 still dispenses, just unfiltered. No bypass plug exists for this line.

Are off-brand filters safe for a KitchenAid refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR2RXD2 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KFIS29BBMS03?

Every six months or at the rated gallon capacity, whichever comes first — the EDR2RXD2 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

CartridgeOEM EDR2RXD2RECOMMENDEDEDR2RXD1 Replacement Water Filter · 1-Pack – ClearFit
PriceOEM list$17.99
Verified fit✓ the bay cartridgeView & buy →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →