Home › Refrigerator Water Filters › Whirlpool › KFIS29BBBL03
Water Filter for the Whirlpool KFIS29BBBL03 (EDR2RXD2)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
We cross-checked the KFIS29BBBL03 against every cartridge family that fits its bay. ClearFit versions are on the way — get notified when they land, or find your exact fit now.
Find filters for your fridge →✓
KFIS29BBBL03 specifics — where the filter actually lives
Finding the bay is the easy part — this chassis puts it high on the fresh-food side in most French-door layouts — upper back or left wall, a deliberate placement that keeps the swap away from the door seals and drawer rails. Mechanically it is a quarter-turn twist-in seat: offer the cartridge, feel the base o-ring register, and lock it by geometry rather than by force.
Two quirks worth knowing before you order: the first removal takes more force than every later one, and skipping the reset leaves a change-light glaring at a perfectly fresh cartridge. Prefix literacy pays here: KFI typically codes for French-door machines in this catalog, and in that format the water path is long enough that a neglected cartridge shows up as flow drop before it shows up as taste. The two-digit 03 tail is revision bookkeeping. Badge position and shelf trim moved around; the bay geometry did not.
KFI vs KBF — what the prefix tells you
The KFI prefix sits next to KBF in the catalog and the split is cabinet mission: KFI marks French-door builds and KBF marks bottom-freezer builds. Cross-checking the prefix before ordering is faster than returning the wrong cartridge. The KFIS29BBBL03 decodes to about 2013-2017 by catalog convention — close enough to bracket the cartridge generation, not close enough to certify.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
How do I reset the filter light on the KitchenAid KFIS29BBBL03?
Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the KFIS29BBBL03 owner’s manual lists the button location for your control panel.
Does the KitchenAid KFIS29BBBL03 need a bypass plug when the filter is out?
No bypass needed: the EDR2RXD2 bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR2RXD2 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KFIS29BBBL03?
Every six months or at the rated gallon capacity, whichever comes first — the EDR2RXD2 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR2RXD2. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
GUIDE · 4,400 SEARCHES/MO
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
GUIDE · 2,300 SEARCHES/MO
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM · 27,100 SEARCHES/MO
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →