Home › Refrigerator Water Filters › GE › PSW23PSWA

PSW23PSWA
Exact-Fit Model Guide

Water Filter for the Profile PSW23PSWA (MSWF)

Your GE refrigerator takes the MSWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PSW23PSWA replacement water filter cartridge
Replacement cartridge for this model
PSW23PSWA · Quick Facts
TYPE
refrigerator
YEARS MADE
—
FILTER LOCATION
in the fresh-food compartment — exact spot varies by dispenser layout
FILTER SLOT
MSWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
—
PSW23PSWA · Quick Facts
Filter locationin the fresh-food compartment — exact spot varies by dispenser layout
Filter slotMSWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for PSW23PSWA. Cross-checked against GE service documentation — this model family uses the MSWF bay with no chip or bypass restrictions.

PSW23PSWA specifics — where the filter actually lives

The PSW23PSWA carries its water filter in the fresh-food compartment — exact spot varies by dispenser layout, so expect to clear one shelf edge before you have working room. Mechanically it is a quarter-turn twist-in seat: look for the index lugs, offer the cartridge, and rotate until they disappear into the housing.

Practical notes from the install forums: expect the first swap to take longer than the box suggests — aged o-rings grip — so budget ten minutes, not five. What pins the parts choice down is the media line: the PSW23PSWA shares its water path with the whole MSWF generation — the cartridge is the common denominator, not the door count. WA is finish coding: handles, colors, panel options — none of it reaches the filter bay.

Reading the PSW23PSWA model code — what the digits tell you

The two digits after the letters are the cabinet size: this is a 23 cu ft refrigerator, which sets how much dispenser work the cartridge does between changes. Filter logic on this chassis: the PSW23PSWA and its siblings all drink from the MSWF line, which keeps the parts search short.

Swap it in 5 minutes

Installing the replacement water filter in the PSW23PSWA
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PSW23PSWA filter questions

Filter light reset on the GE PSW23PSWA — how?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the PSW23PSWA owner’s manual lists the button location for your control panel.

Will the GE PSW23PSWA dispense water without a filter cartridge?

No — the MSWF bay seals on the cartridge itself, so removing it just means unfiltered water until the next change, not a leak.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MSWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PSW23PSWA?

Every six months or at the rated gallon capacity, whichever comes first — the MSWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MSWF cartridge

This bay takes the OEM MSWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →