Home › Refrigerator Water Filters › GE › PSSF3RGXAWW
Water Filter for the Profile PSSF3RGXAWW (MWF)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana

Every cartridge that fits this model — pulled live from the catalogue:
✓
PSSF3RGXAWW specifics — where the filter actually lives
Finding the bay is the easy part — this chassis puts it in the lower fresh-food zone in most side-by-side layouts, knee height or below, so expect to clear one shelf edge before you have working room. Mechanically the PSSF3RGXAWW uses a twist-in cartridge: offer the cartridge, feel the base o-ring register, and lock it by geometry rather than by force.
The small print owners learn the hard way: a first removal that fights a set o-ring, and a status light that needs a manual hold-to-reset before it acknowledges the new cartridge. Read the prefix and the maintenance writes itself: the PSS run is GE’s Profile side-by-side series; across the run, the filter bay is one of the constants. Finish codes such as WW change the look, not the plumbing — order the cartridge by model, ignore the finish letter.
PSS vs GSS — what the prefix tells you
Prefix families here: PSS against GSS. The Profile side-by-side/side-by-side split tracks the PSS/GSS prefixes — cartridge fit follows the water path, not the label on the door. What pins the parts choice down is the media line: the MWF line — which is why fit listings key on chassis rather than door style.
Swap it in 5 minutes

- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water

| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
PSSF3RGXAWW filter questions
Reset procedure for the change-filter alert on the PSSF3RGXAWW?
Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the PSSF3RGXAWW owner’s manual page for filter status.
Running the PSSF3RGXAWW with an empty filter bay — does it need a cap?
The bay self-seals: with no cartridge the PSSF3RGXAWW still dispenses, just unfiltered. No bypass plug exists for this line.
Are off-brand filters safe for a GE refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM MWF cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my PSSF3RGXAWW?
Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
| Cartridge | OEM MWF | RECOMMENDEDMWF Replacement Water Filter · 1-Pack – ClearFit | MWF Replacement Water Filter · 3-Pack – ClearFit | MWF Replacement Water Filter · 6-Pack – ClearFit |
|---|---|---|---|---|
| Price | OEM list | $14.99 | $37.47 | $67.44 |
| Verified fit | ✓ the bay cartridge | View & buy → | View & buy → | View & buy → |
This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →