HomeRefrigerator Water FiltersGEPSSC6KGWABB

PSSC6KGWABB
Exact-Fit Model Guide

Water Filter for the GE PSSC6KGWABB (MSWF)

Your GE refrigerator takes the MSWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PSSC6KGWABB replacement water filter cartridge
Replacement cartridge for this model
PSSC6KGWABB · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
low on the fresh-food side or behind the base grille in most side-by-side layouts
FILTER SLOT
MSWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
PSSC6KGWABB · Quick Facts
Filter locationlow on the fresh-food side or behind the base grille in most side-by-side layouts
Filter slotMSWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for PSSC6KGWABB. Cross-checked against GE service documentation — this model family uses the MSWF bay with no chip or bypass restrictions.

PSSC6KGWABB specifics — where the filter actually lives

On the PSSC6KGWABB, the cartridge low on the fresh-food side or behind the base grille in most side-by-side layouts, so expect to clear one shelf edge before you have working room. This is a twist-style bay, the friendlier design: offer the cartridge, feel the base o-ring register, and lock it by geometry rather than by force.

Owners of the PSSC6KGWABB report the same friction points: plan on a towel for the first pull — sitting water in the line — and a five-second reset hold once the fresh cartridge is in. The badge reads PSSC6KGWABB, but the chassis reads PSS: PSS is GE’s Profile side-by-side designation proper, and the service literature files every one of these under the same cartridge line. The BB tail marks finish variants of one chassis; the filter bay is shared across the entire finish range.

PSS vs GSS — what the prefix tells you

The PSS prefix sits next to GSS in the catalog and the split is cabinet mission: The Profile side-by-side/side-by-side split tracks the PSS/GSS prefixes — cartridge fit follows the water path, not the label on the door. Whatever the badge on the door says, the parts reality is the MSWF media line; that is the anchor every compatible listing hangs from.

Swap it in 5 minutes

Installing the replacement water filter in the PSSC6KGWABB
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PSSC6KGWABB filter questions

How to reset the water filter indicator: GE PSSC6KGWABB?

Lock in the new cartridge first, then hold the reset control for a few seconds — the PSSC6KGWABB manual documents the button for each panel variant.

Is a bypass plug required for the PSSC6KGWABB when the cartridge is removed?

No — the MSWF bay seals on the cartridge itself, so removing it just means unfiltered water until the next change, not a leak.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MSWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PSSC6KGWABB?

Every six months or at the rated gallon capacity, whichever comes first — the MSWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MSWF cartridge

This bay takes the OEM MSWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →