HomeRefrigerator Water FiltersGEPSS25SGMABS

PSS25SGMABS
Exact-Fit Model Guide

Water Filter for the GE PSS25SGMABS (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PSS25SGMABS replacement water filter cartridge
Replacement cartridge for this model
PSS25SGMABS · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
bottom of the fresh-food column or at the grille line in most side-by-side builds
FILTER SLOT
MWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
PSS25SGMABS · Quick Facts
Filter locationbottom of the fresh-food column or at the grille line in most side-by-side builds
Filter slotMWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for PSS25SGMABS. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

PSS25SGMABS specifics — where the filter actually lives

The PSS25SGMABS carries its water filter bottom of the fresh-food column or at the grille line in most side-by-side builds, the same estate every Profile side-by-side refrigerator in this family uses. It is a twist-lock bay: seat the cartridge against the o-ring, quarter-turn clockwise, and let the keyed flange do the aligning for you.

The recurring owner notes: the reset control is the step everyone skips; the light will not acknowledge a new cartridge on its own. The badge reads PSS25SGMABS, but the chassis reads PSS: GE uses it across the Profile side-by-side range, which means shared cartridge economics — one media family, dozens of cabinet variants, all drinking from the same parts catalog. Trim code BS: cosmetic variants of one chassis, one cartridge family.

PSS vs GSS — what the prefix tells you

Catalog shorthand: Profile side-by-side against side-by-side, respectively. Filter bays rarely care — the media family carries over more often than not. The two digits after the letters are the cabinet size: this is a 25 cu ft refrigerator, which sets how much dispenser work the cartridge does between changes.

Swap it in 5 minutes

Installing the replacement water filter in the PSS25SGMABS
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PSS25SGMABS filter questions

GE PSS25SGMABS: how do I clear the change-filter light?

Lock in the new cartridge first, then hold the reset control for a few seconds — the PSS25SGMABS manual documents the button for each panel variant.

Can I run the GE PSS25SGMABS with no cartridge installed?

No — the MWF bay seals on the cartridge itself, so removing it just means unfiltered water until the next change, not a leak.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PSS25SGMABS?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →