HomeRefrigerator Water FiltersGEPSH25MGWA

PSH25MGWA
Exact-Fit Model Guide

Water Filter for the GE PSH25MGWA (MSWF)

Your GE refrigerator takes the MSWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PSH25MGWA replacement water filter cartridge
Replacement cartridge for this model
PSH25MGWA · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear
FILTER SLOT
MSWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
PSH25MGWA · Quick Facts
Filter locationat the base of the fresh-food compartment in most side-by-side builds — grille or lower rear
Filter slotMSWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for PSH25MGWA. Cross-checked against GE service documentation — this model family uses the MSWF bay with no chip or bypass restrictions.

PSH25MGWA specifics — where the filter actually lives

Where the filter actually lives: at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear, so expect to clear one shelf edge before you have working room. Mechanically the PSH25MGWA uses a twist-in cartridge: the ears on the cartridge neck are the guide — line them up, lift into the seat, and quarter-turn home.

The recurring owner notes: flush before the first glass — new carbon beds shed fines for the first gallon or so, which is cosmetic, not contamination. The PSH prefix is the tell: PSH on this badge family usually means Profile side-by-side stock, which is why fit charts list cartridges by chassis code first. Finish letter sets like WA never alter the bay; the MSWF line fits the whole set.

PSH vs PSK — what the prefix tells you

Same mission, different eras: PSH and PSK both mean Profile side-by-side here — order by chassis code and the cartridge sorts itself out. cabinet class 25 cubic feet — a box that size leans on the dispenser, so the six-month cartridge interval earns its keep.

Swap it in 5 minutes

Installing the replacement water filter in the PSH25MGWA
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PSH25MGWA filter questions

Clearing the filter status light on a GE PSH25MGWA?

Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the PSH25MGWA owner’s manual page for filter status.

Running the PSH25MGWA with an empty filter bay — does it need a cap?

Nothing to buy — the MSWF housing closes without a cartridge; water runs unfiltered until the next one goes in.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MSWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PSH25MGWA?

Every six months or at the rated gallon capacity, whichever comes first — the MSWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MSWF cartridge

This bay takes the OEM MSWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →