Water Filter for the GE GSH25JFTAWW (MWF)

GSH25JFTAWW specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear, the same estate every side-by-side variant refrigerator in this family uses. This is a twist-style bay, the friendlier design: no tools, no housing removal, and the cartridge indexes in only one orientation despite looking symmetric.

Two quirks worth knowing before you order: keep a folded towel under the bay before you open it; the line holds a cup of water even with the valve shut. The GSH in GSH25JFTAWW is doing real work: generally a side-by-side variant machine, and the filter bay inherits the geometry that implies — treat as typical, not absolute. Trim code WW: cosmetic variants of one chassis, one cartridge family.

GSH vs GSS — what the prefix tells you

The GSH prefix sits next to GSS in the catalog and the split is cabinet mission: side-by-side variant against side-by-side, respectively. Filter bays rarely care — the media family carries over more often than not. Cabinet decode: 25 cu ft — the number that tells you whether this cartridge feeds a family-size dispenser or a compact one.

Swap it in 5 minutes

• Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
• Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
• Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
• Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GSH25JFTAWW filter questions