LGHX2636TF8
Exact-Fit Model Guide

Water Filter for the Frigidaire LGHX2636TF8 (EPTWFU01)

Your Frigidaire refrigerator takes the EPTWFU01 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

LGHX2636TF8 replacement water filter cartridge
Replacement cartridge for this model
LGHX2636TF8 · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
inside the fresh-food cavity, position varying with dispenser spec
FILTER SLOT
PureSource Ultra II bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
LGHX2636TF8 · Quick Facts
Filter locationinside the fresh-food cavity, position varying with dispenser spec
Filter slotPureSource Ultra II bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for LGHX2636TF8. Cross-checked against Frigidaire service documentation — this model family uses the EPTWFU01 bay with no chip or bypass restrictions.

LGHX2636TF8 specifics — where the filter actually lives

The filter bay on the LGHX2636TF8 inside the fresh-food cavity, position varying with dispenser spec, so expect to clear one shelf edge before you have working room. Mechanically it is a quarter-turn twist-in seat: align the ears, seat it, and rotate until the stop catches — a five-minute job start to finish.

The recurring owner notes: carbon fines in the first pours are normal for a fresh bed, and the filter timer only restarts when you hold the reset. The constant across every trim of this machine is the cartridge line — the EPTWFU01 line — which is why fit listings key on chassis rather than door style. That F8 suffix is trim-level shorthand. Frigidaire kept the EPTWFU01 bay common to every finish in the line.

Reading the LGHX2636TF8 model code — what the digits tell you

Capacity 26 cubic feet: a mid-to-full-size cabinet whose dispenser traffic sets the realistic change cadence. The stable part of the LGHX2636TF8 story is the water path: every variant of this chassis locks onto the EPTWFU01 line — that is the whole parts story.

Swap it in 5 minutes

Installing the replacement water filter in the LGHX2636TF8
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

LGHX2636TF8 filter questions

Frigidaire LGHX2636TF8: how do I clear the change-filter light?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the LGHX2636TF8 owner’s manual lists the button location for your control panel.

Is a bypass plug required for the LGHX2636TF8 when the cartridge is removed?

You can, but unfiltered — the EPTWFU01 bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.

Are off-brand filters safe for a Frigidaire refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EPTWFU01 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my LGHX2636TF8?

Every six months or at the rated gallon capacity, whichever comes first — the EPTWFU01 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EPTWFU01 cartridge

This bay takes the OEM EPTWFU01. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →