Water Filter for the Frigidaire LGHS2655KP1 (ULTRAWF)

LGHS2655KP1 specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it in the fresh-food compartment, placement dependent on the dispenser package, a deliberate placement that keeps the swap away from the door seals and drawer rails. It is a twist-lock bay: the cartridge drops into the keyed seat and locks with a short quarter turn.

Before you click buy, two things: run the first gallon or two through a fresh cartridge before drinking — carbon fines are normal — and reset the indicator so the countdown matches reality. What pins the parts choice down is the media line: the ULTRAWF media line; that is the anchor every compatible listing hangs from. That P1 suffix is trim-level shorthand. Frigidaire kept the ULTRAWF bay common to every finish in the line.

Reading the LGHS2655KP1 model code — what the digits tell you

The two digits after the letters are the cabinet size: this is a 26 cu ft refrigerator, which sets how much dispenser work the cartridge does between changes. The model code varies with trim, but the parts logic does not: the water path is fixed at the ULTRAWF line — that asymmetry is what makes filter shopping simple.

Swap it in 5 minutes

• Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
• Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
• Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
• Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

LGHS2655KP1 filter questions