Water Filter for the Frigidaire LGHS2634KE0 (ULTRAWF)

LGHS2634KE0 specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it in the fresh-food compartment, placement dependent on the dispenser package — usually a kneeling-height or shoulder-height swap, not a teardown. It is a twist-lock bay: the bay wants the cartridge offered flat, rotated a quarter turn, and nothing more — hand pressure only.

Owners of the LGHS2634KE0 report the same friction points: the change light ignores the new cartridge until you reset it, and the first removal always takes more muscle than the manual implies. One more anchor for the parts search: the ULTRAWF media line; that is the anchor every compatible listing hangs from. Trailing letters like E0 denote trim and finish: stainless, panel-ready, handle variants. The water path is identical across them.

Reading the LGHS2634KE0 model code — what the digits tell you

Capacity check: the 26 cubic feet in the code is the box size, and bigger boxes push more water through the same cartridge between swaps. The model code varies with trim, but the parts logic does not: whatever the door count, the cartridge answer for this chassis is the ULTRAWF family.

Swap it in 5 minutes

• Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
• Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
• Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
• Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

LGHS2634KE0 filter questions