Home › Refrigerator Water Filters › Frigidaire › GHSC39ETEB0
Water Filter for the Frigidaire GHSC39ETEB0 (WF2CB)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana

Every cartridge that fits this model — pulled live from the catalogue:
✓
GHSC39ETEB0 specifics — where the filter actually lives
The GHSC39ETEB0 carries its water filter behind the lower fresh-food trim or base grille in most side-by-side layouts, a deliberate placement that keeps the swap away from the door seals and drawer rails. Mechanically the GHSC39ETEB0 uses a twist-in cartridge: release is counterclockwise, seating is clockwise, and the stops are firm enough that you cannot overshoot.
Owners of the GHSC39ETEB0 report the same friction points: a stiff first removal on builds that sat on the same cartridge for years, and an indicator light that wants a manual reset after a non-OEM cartridge is seated. One prefix, one chassis family: in this catalog GHSC is the side-by-side family marker; internal layouts vary, the bay layout does not. Finish codes such as B0 change the look, not the plumbing — order the cartridge by model, ignore the finish letter.
GHSC vs FFSS — what the prefix tells you
Same parts shelf, two cabinet missions — Ordering by prefix works because GHSC means side-by-side family and FFSS means side-by-side in this catalog — and the cartridge pool overlaps both. the 39 cubic feet in the code is the size class; households that size move enough water that the six-month interval is worth honoring.
Swap it in 5 minutes

- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water

| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
GHSC39ETEB0 filter questions
How to reset the water filter indicator: Frigidaire GHSC39ETEB0?
Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the GHSC39ETEB0 owner’s manual page for filter status.
Running the GHSC39ETEB0 with an empty filter bay — does it need a cap?
You can, but unfiltered — the WF2CB bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.
Are off-brand filters safe for a Frigidaire refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM WF2CB cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my GHSC39ETEB0?
Every six months or at the rated gallon capacity, whichever comes first — the WF2CB class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM WF2CB. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →