Home › Refrigerator Water Filters › Whirlpool › MSD2542VEB00

MSD2542VEB00

Exact-Fit Model Guide

Water Filter for the Maytag MSD2542VEB00 (EDR3RXD1)

Your Whirlpool refrigerator takes the EDR3RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

MSD2542VEB00 replacement water filter cartridge — Replacement cartridge for this model

MSD2542VEB00 · Quick Facts

TYPE

refrigerator

YEARS MADE

2008-2012

FILTER LOCATION

at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear

FILTER SLOT

EveryDrop Filter 3 bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

—

MSD2542VEB00 · Quick Facts

Filter locationat the base of the fresh-food compartment in most side-by-side builds — grille or lower rear

Filter slotEveryDrop Filter 3 bay

Replace everyEvery 6 months

Years made2008-2012

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for MSD2542VEB00. Cross-checked against Whirlpool service documentation — this model family uses the EDR3RXD1 bay with no chip or bypass restrictions.

Not your model? Check the finder →

MSD2542VEB00 specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear, a spot that survives trim changes across the MSD run. The seat is a twist-in design — one twist to release, one to lock; between them you are holding the entire service procedure.

Order-day practicalities: the first removal takes more force than every later one, and skipping the reset leaves a change-light glaring at a perfectly fresh cartridge. The MSD in MSD2542VEB00 is doing real work: generally a side-by-side machine, and the filter bay inherits the geometry that implies — treat as typical, not absolute. Revision 00 changed trim details, not the water circuit; order with confidence by model stem.

MSD vs MFI — what the prefix tells you

Prefix families here: MSD against MFI. MSD machines are side-by-side; MFI machines are French-door. Both draw from the same cartridge line, which is why fit charts list them together. The MSD2542VEB00 decodes to about 2008 to 2012 by catalog convention — close enough to bracket the cartridge generation, not close enough to certify.

Swap it in 5 minutes

Installing the replacement water filter in the MSD2542VEB00

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

MSD2542VEB00 filter questions

Clearing the filter status light on a Maytag MSD2542VEB00?

With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the MSD2542VEB00 manual’s filter section has the exact control for your trim.

Can I run the Maytag MSD2542VEB00 with no cartridge installed?

No cap needed — the EDR3RXD1 bay passes water unfiltered while empty; it does not leak, it just skips filtration.

Are off-brand filters safe for a Maytag refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR3RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my MSD2542VEB00?

Every six months or at the rated gallon capacity, whichever comes first — the EDR3RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR3RXD1 cartridge

This bay takes the OEM EDR3RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →